Dell Inspiron 17 5000 Boot From USB for Linux and Windows

We will explain Dell Inspiron 17 5000 Boot from USB guide which can work for Windows and Linux. So without wasting time lets discuss USB boot guide for your Dell Inspiron 17 5000.

What is Boot from USB?

  • It is a process of starting a Computer operating system from the USB drive.
  • Booting from USB enables to get booting information in a USB  rather than using a hard disk or the CD drive.
  • All new operating systems support to boot from USB in Dell Inspiron 17 5000.

About Dell Inspiron 17 5000

  • Dell Inspiron 17 5000 comes with a 14-inch Full HD IPS display with a resolution of 1920 X 1080 pixels.
  • It is powered by 2.7-GHz Intel Core i5-7200U CPU with storage OF 1TB HDD and 8 DDR4 RAM which is upgradable to 16GB.
  •  According to Laptopmag’s battery test, It lasted for 5 hours and 52 minutes.
  • Finally, Windows 10 Home is pre-installed.

Read Review

Advantages of Booting from USB?

There are many advantages of Booting from USB over other booting options such as DVD and other which are discussed below,

  • No need to purchase any blank CD and you can fill your own stuff along with the ISO file.
  • USB Drives are reusable
  • Faster read and write than CD
  • Very convenient and portable

Disadvantages of Booting from USB

  • Booting from USB is depended on the Hardware such as BIOS, motherboard and flash drive model as it may be working with one computer and refuses to another.
  • CD has wider support and USB boot functionality is not available for may operating system.

Ways to Boot From USB in Dell Inspiron 17 5000

1.Dell Inspiron 17 5000 Boot From USB using Rufus

Download Rufus
  1. Dell Inspiron 17 5000 Boot from USB
  2. After installing Rufus simply select the ISO file from the file manager and accept all settings when the popup window appears.
  3. Select MBR partition scheme for BIOS or UEFI  and If your laptop has UEFI bios then select the other two options.
  4. For the Filesystem select NTFS  option and select if your PC has UEFI bios then select FAT32.
  5. The default Cluster size option should be selected.
  6. Make sure all three options including Quick Format, Create a Bootable disk using and Create extended labels and icon files are selected.
  7. Finally, start the process and this software will automatically format and create bootable USB flash drive.

2. Dell Inspiron 17 5000 Boot from USB using Unetbootin

UNetbootin enables you to create a bootable USB drive for Live operating system for Ubuntu and other Linux distributions. To create a Bootable Live USB drive follow the instructions below,

Download UNetbootin
  • Dell Inspiron 17 5000 Boot from USB
  • UNetbootin installs the Linux Distros ISO files for you if you want to use your own downloaded ISO file then follow instructions below,
  • Dell Inspiron 17 5000 Boot from USB
  • To use already downloaded ISO file select the disk image option and provide the location of the file by clicking “…”.
  • After selecting the Linux Distribution or ISO file Format your USB drive as FAT32.
  • Target the USB drive on your Dell Inspiron 17 5000and click on OK.
  • The process will automatically start and in case the installation doesn’t complete you can reformat USB as FAT32.

3. By using Universal USB Installer

Download Universal USB Installer
  • Using the Universal USB Installer is the easiest way to create a live Linux USB or bootable USB.
  • All you need to do is selecting the ISO file, your Flash Drive and, finally, Click Install.
  • The process will automatically start and you will receive a ready bootable USB Flash Drive.

Change Boot order to USB in Dell Inspiron 17 5000

  1. At boot, Press the F2 key (or alternatively press the F12 key then select the option to enter the BIOS setup).
  2. In POST Behavior, Select – Fastboot the select the Thorough option.
  3. In System Configuration -Select USB/Thunderbolt Configuration –Enable Thunderbolt Boot Support (Figure 2):
  4. Figure 2: Enable Thunderbolt Boot Support under the USB/Thunderbolt Configuration settings in the BIOS
  5. In the General Tab, Advanced Boot Configuration, check Enable Legacy Option ROMs & Enable UEFI Network Stack if not already checked (Figure 3):
  6. Figure 3: Enable UEFI Network Stack under the Advanced Boot Options settings in the BIOS
  7. Reboot the system, the USB Type-C device should now appear in the boot options.

Boot information provided by www.dell.com.

Read some installation guides –

Discuss any problem on Infofuge and start by  Asking a Question

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top